DYZE DESIGN Docs

# Initial Setup

The steps below are provided as a fundamental guide to help you successfully set up and configure your machine.

Crucial Safety Warning
Your safety and the integrity of the equipment are paramount. An unconfigured machine, particularly during initial setup and movement tests, poses a significant risk of causing unexpected motion or collision.Safety Directives:

  1. Maintain High Focus and Attention: Always remain alert and fully focused on the machine's behavior during the setup process. Do not multitask or allow distractions.
  2. Be Prepared for Emergency Stops: Always have your hand ready to hit the Emergency Stop (E-STOP) button or pull the power source at a moment's notice. The E-STOP should be your immediate, reflexive action if you observe:
    • Uncontrolled or erratic motion.
    • A high risk of the tool head or moving parts striking the limit switches, the machine frame, or the work surface.
    • Abnormal noises (grinding, scraping, etc.).
  3. Perform Slow, Incremental Tests: All initial movements should be performed at the slowest possible feed rates and only incrementally to verify correct direction and limits before attempting full speed or range of motion.

Pre-Power Checklist

  • Secure Installation: Ensure the machine is properly mounted, level, and stable.
  • Wiring Verification: Double-check all power, motor, limit switch, and control wiring connections against the schematic to ensure they are secure and correctly terminated. Incorrect wiring can damage components.
  • Clearance Check: Verify that the entire working area is free of tools, debris, and obstructions that could interfere with the full travel of all axes.