# General Settings
# Architecture
Defines the printer motion architecture used for coordinate transformations.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | Cartesian |
| Allowed values | 0, 1, 2 |
| Value mapping | 0 → Cartesian1 → CoreXY2 → Idex |
# Default speed
Default movement speed used when a command does not specify a speed. Used for movements when resuming a print or in some calibrations. Also used to populate the speed field in the control tab.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 20 |
| Limits / format | minimum: 1; maximum: 1000 |
# Rapid move max speed
Maximum speed for rapid G0 moves.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 300 |
| Limits / format | minimum: 0; maximum: 5000 |
# Linear move max speed
Maximum speed for linear G1 moves.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 100 |
| Limits / format | minimum: 0; maximum: 5000 |
# Max acceleration
Maximum acceleration allowed.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | 3000 |
| Limits / format | minimum: 0; maximum: 100000 |
# Minimum corner speed
Minimum speed maintained while passing through motion corners.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 1000 |
# Junction deviation distance
Cornering tolerance used to limit speed changes between motion segments.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
| Limits / format | minimum: 0; maximum: 10 |
# Input Shaping Type
Input-shaping algorithm used to reduce motion-induced ringing.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | None |
| Allowed values | None, ZVD, ZVDD, ZVDDD, MZV, EI2, EI3 |
# Input Shaping Frequency
Resonance frequency, in hertz, used by input shaping.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 150 |
# Input Shaping Damping
Damping ratio used by the selected input-shaping algorithm.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0.1 |
| Limits / format | minimum: 0; maximum: 0.99 |
# Points per axis
Number of bed-mesh probe points along each axis.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 2 |
| Limits / format | minimum: 2; maximum: 21 |
# Scan height
Safe Z height used while moving between bed-mesh probe points.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 5 |
| Limits / format | minimum: 0 |
# Fade height
Height above which bed-mesh compensation is gradually disabled.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0 |
# Probe speed
Speed used while probing each point of the bed mesh.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 1 |
| Limits / format | minimum: 1 |
# X axis padding
Distance excluded from each X edge during bed-mesh probing.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0 |
# Y axis padding
Distance excluded from each Y edge during bed-mesh probing.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0 |
# X axis offset
X offset between the tool reference point and the mesh sensor.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
# Y axis offset
Y offset between the tool reference point and the mesh sensor.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
# Probe endstop input
Endstop input used as the bed probe for mesh scanning.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string or null |
| Default | null |
| Allowed values | Base: X1, X2, Y1, Y2, Z1, Z2, Z prob1, Z prob2Dynamic: Accessories whose type is Bed Sensor with a Laser sensor type. |
# Input type
Indicates whether the mesh probe input is normally closed.
| Property | Value |
|---|---|
| Required | Yes |
| Type | boolean |
| Default | false |
# Probing count
Number of measurements taken at each bed-mesh point.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | 1 |
| Limits / format | minimum: 1 |
# Heater number mode for M104/109
Make M104/M109 T parameter refer to heater number instead of tool number
| Property | Value |
|---|---|
| Required | Yes |
| Type | boolean |
| Default | false |
# DriftGuard auto correction
Detects lagging motors and automatically throttles their maximum speed and acceleration to maintain synchronization. This reduction persists until the printer is restarted.
| Property | Value |
|---|---|
| Required | Yes |
| Type | boolean |
| Default | false |
# DriftGuard flag errors
When enabled, the system will raise a fault if the feedback loop detects a position deviation beyond acceptable limits.
| Property | Value |
|---|---|
| Required | Yes |
| Type | boolean |
| Default | true |