# Tool Settings
# Pulsar
# Tool number
Numeric identifier used to select this tool in G-code.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
| Limits / format | minimum: 0 |
# Name
User-defined name for this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | `` |
# X real axis (for IDEX architecture)
Logical axis used as this tool's X coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | X |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Y real axis (for IDEX architecture)
Logical axis used as this tool's Y coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Y |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Z real axis (for IDEX architecture)
Logical axis used as this tool's Z coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Z |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# X offset
Tool offset from the machine origin along the X axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Y offset
Tool offset from the machine origin along the Y axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Z offset
Tool offset from the machine origin along the Z axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Motor
References the motor that drives this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Temperature setpoints
Preset temperatures values for the control slider.
| Property | Value |
|---|---|
| Required | No |
| Type | array |
| Default | [] |
| Limits / format | items: number; item minimum: 0 |
# Fan
References the fan used to cool this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Fan act. temp
Tool temperature above which the assigned fan is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Part cooling fan
References the fan used to cool printed material.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cooling
References the liquid-cooling accessory assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cool act. temp.
Tool temperature above which liquid cooling is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Low extrusion speed
Slow speed used for manual extrusion operations in the control interface.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 5 |
| Limits / format | minimum: 1; maximum: 1000 |
# High extrusion speed
Fast speed used for manual extrusion operations.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 60 |
| Limits / format | minimum: 1; maximum: 1000 |
# Pressure compensation K coefficient
Pressure advance coefficient used to compensate for extrusion pressure changes.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 1 |
# Top heater
References the heater assigned to the top heating zone of this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Middle heater
References the heater assigned to the middle heating zone of this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Bottom heater
References the heater assigned to the bottom heating zone of this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Pressure sensor
References the pressure sensor assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
| Allowed values | Dynamic: Accessories whose type is Load Cell. |
# Pellets feeding system
References the pellet feeding system assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# DyzEnd
# Tool number
Numeric identifier used to select this tool in G-code.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
| Limits / format | minimum: 0 |
# Name
User-defined name for this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | `` |
# X real axis (for IDEX architecture)
Logical axis used as this tool's X coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | X |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Y real axis (for IDEX architecture)
Logical axis used as this tool's Y coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Y |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Z real axis (for IDEX architecture)
Logical axis used as this tool's Z coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Z |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# X offset
Tool offset from the machine origin along the X axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Y offset
Tool offset from the machine origin along the Y axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Z offset
Tool offset from the machine origin along the Z axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Motor
References the motor that drives this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Temperature setpoints
Preset temperatures values for the control slider.
| Property | Value |
|---|---|
| Required | No |
| Type | array |
| Default | [] |
| Limits / format | items: number; item minimum: 0 |
# Fan
References the fan used to cool this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Fan act. temp
Tool temperature above which the assigned fan is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Part cooling fan
References the fan used to cool printed material.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cooling
References the liquid-cooling accessory assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cool act. temp.
Tool temperature above which liquid cooling is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Low extrusion speed
Slow speed used for manual extrusion operations in the control interface.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 5 |
| Limits / format | minimum: 1; maximum: 1000 |
# High extrusion speed
Fast speed used for manual extrusion operations.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 60 |
| Limits / format | minimum: 1; maximum: 1000 |
# Pressure compensation K coefficient
Pressure advance coefficient used to compensate for extrusion pressure changes.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 1 |
# Heater
References the heater assigned to this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Filament size
Diameter of the filament used by the tool, in millimetres.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 2.85 |
| Allowed values | 1.75, 2.85 |
# Filament monitor
References the filament monitor assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Typhoon
# Tool number
Numeric identifier used to select this tool in G-code.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
| Limits / format | minimum: 0 |
# Name
User-defined name for this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | `` |
# X real axis (for IDEX architecture)
Logical axis used as this tool's X coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | X |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Y real axis (for IDEX architecture)
Logical axis used as this tool's Y coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Y |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Z real axis (for IDEX architecture)
Logical axis used as this tool's Z coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Z |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# X offset
Tool offset from the machine origin along the X axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Y offset
Tool offset from the machine origin along the Y axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Z offset
Tool offset from the machine origin along the Z axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Motor
References the motor that drives this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Temperature setpoints
Preset temperatures values for the control slider.
| Property | Value |
|---|---|
| Required | No |
| Type | array |
| Default | [] |
| Limits / format | items: number; item minimum: 0 |
# Fan
References the fan used to cool this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Fan act. temp
Tool temperature above which the assigned fan is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Part cooling fan
References the fan used to cool printed material.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cooling
References the liquid-cooling accessory assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cool act. temp.
Tool temperature above which liquid cooling is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Low extrusion speed
Slow speed used for manual extrusion operations in the control interface.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 5 |
| Limits / format | minimum: 1; maximum: 1000 |
# High extrusion speed
Fast speed used for manual extrusion operations.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 60 |
| Limits / format | minimum: 1; maximum: 1000 |
# Pressure compensation K coefficient
Pressure advance coefficient used to compensate for extrusion pressure changes.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 1 |
# Top heater
References the heater assigned to the top heating zone of this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Bottom heater
References the heater assigned to the bottom heating zone of this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Filament size
Diameter of the filament used by the tool, in millimetres.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 2.85 |
| Allowed values | 1.75, 2.85 |
# Filament monitor
References the filament monitor assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Atom
# Tool number
Numeric identifier used to select this tool in G-code.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
| Limits / format | minimum: 0 |
# Name
User-defined name for this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | `` |
# X real axis (for IDEX architecture)
Logical axis used as this tool's X coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | X |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Y real axis (for IDEX architecture)
Logical axis used as this tool's Y coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Y |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Z real axis (for IDEX architecture)
Logical axis used as this tool's Z coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Z |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# X offset
Tool offset from the machine origin along the X axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Y offset
Tool offset from the machine origin along the Y axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Z offset
Tool offset from the machine origin along the Z axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Motor
References the motor that drives this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Temperature setpoints
Preset temperatures values for the control slider.
| Property | Value |
|---|---|
| Required | No |
| Type | array |
| Default | [] |
| Limits / format | items: number; item minimum: 0 |
# Fan
References the fan used to cool this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Fan act. temp
Tool temperature above which the assigned fan is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Part cooling fan
References the fan used to cool printed material.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cooling
References the liquid-cooling accessory assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cool act. temp.
Tool temperature above which liquid cooling is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Low extrusion speed
Slow speed used for manual extrusion operations in the control interface.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 5 |
| Limits / format | minimum: 1; maximum: 1000 |
# High extrusion speed
Fast speed used for manual extrusion operations.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 60 |
| Limits / format | minimum: 1; maximum: 1000 |
# Pressure compensation K coefficient
Pressure advance coefficient used to compensate for extrusion pressure changes.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 1 |
# Top heater
References the heater assigned to the top heating zone of this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Bottom heater
References the heater assigned to the bottom heating zone of this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Pressure sensor
References the pressure sensor assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
| Allowed values | Dynamic: Accessories whose type is Load Cell. |
# Pellets feeding system
References the pellet feeding system assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Zephyr
# Tool number
Numeric identifier used to select this tool in G-code.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
| Limits / format | minimum: 0 |
# Name
User-defined name for this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | `` |
# X real axis (for IDEX architecture)
Logical axis used as this tool's X coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | X |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Y real axis (for IDEX architecture)
Logical axis used as this tool's Y coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Y |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Z real axis (for IDEX architecture)
Logical axis used as this tool's Z coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Z |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# X offset
Tool offset from the machine origin along the X axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Y offset
Tool offset from the machine origin along the Y axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Z offset
Tool offset from the machine origin along the Z axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Motor
References the motor that drives this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Temperature setpoints
Preset temperatures values for the control slider.
| Property | Value |
|---|---|
| Required | No |
| Type | array |
| Default | [] |
| Limits / format | items: number; item minimum: 0 |
# Fan
References the fan used to cool this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Fan act. temp
Tool temperature above which the assigned fan is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Part cooling fan
References the fan used to cool printed material.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cooling
References the liquid-cooling accessory assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cool act. temp.
Tool temperature above which liquid cooling is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Low extrusion speed
Slow speed used for manual extrusion operations in the control interface.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 5 |
| Limits / format | minimum: 1; maximum: 1000 |
# High extrusion speed
Fast speed used for manual extrusion operations.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 60 |
| Limits / format | minimum: 1; maximum: 1000 |
# Pressure compensation K coefficient
Pressure advance coefficient used to compensate for extrusion pressure changes.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 1 |
# Heater
References the heater assigned to this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Filament size
Diameter of the filament used by the tool, in millimetres.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 1.75 |
| Allowed values | 1.75, 2.85 |
# Filament monitor
References the filament monitor assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Zephyr Early Access
# Tool number
Numeric identifier used to select this tool in G-code.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
| Limits / format | minimum: 0 |
# Name
User-defined name for this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | `` |
# X real axis (for IDEX architecture)
Logical axis used as this tool's X coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | X |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Y real axis (for IDEX architecture)
Logical axis used as this tool's Y coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Y |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Z real axis (for IDEX architecture)
Logical axis used as this tool's Z coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Z |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# X offset
Tool offset from the machine origin along the X axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Y offset
Tool offset from the machine origin along the Y axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Z offset
Tool offset from the machine origin along the Z axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Motor
References the motor that drives this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | string |
| Default | null |
# Temperature setpoints
Preset temperatures values for the control slider.
| Property | Value |
|---|---|
| Required | No |
| Type | array |
| Default | [] |
| Limits / format | items: number; item minimum: 0 |
# Fan
References the fan used to cool this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Fan act. temp
Tool temperature above which the assigned fan is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Part cooling fan
References the fan used to cool printed material.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cooling
References the liquid-cooling accessory assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cool act. temp.
Tool temperature above which liquid cooling is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Low extrusion speed
Slow speed used for manual extrusion operations in the control interface.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 5 |
| Limits / format | minimum: 1; maximum: 1000 |
# High extrusion speed
Fast speed used for manual extrusion operations.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 60 |
| Limits / format | minimum: 1; maximum: 1000 |
# Pressure compensation K coefficient
Pressure advance coefficient used to compensate for extrusion pressure changes.
| Property | Value |
|---|---|
| Required | Yes |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 1 |
# Spindle
# Tool number
Numeric identifier used to select this tool in G-code.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
| Limits / format | minimum: 0 |
# Name
User-defined name for this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | `` |
# X real axis (for IDEX architecture)
Logical axis used as this tool's X coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | X |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Y real axis (for IDEX architecture)
Logical axis used as this tool's Y coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Y |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Z real axis (for IDEX architecture)
Logical axis used as this tool's Z coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Z |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# X offset
Tool offset from the machine origin along the X axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Y offset
Tool offset from the machine origin along the Y axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Z offset
Tool offset from the machine origin along the Z axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Module IO
Identifier of the IO module that controls this tool.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
# Port
Port number on the selected module used by this device.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | 7 |
| Allowed values | 7 |
# Max RPM
Maximum spindle speed in revolutions per minute.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | 25000 |
| Limits / format | minimum: 1; maximum: 100000 |
# Wait for stable
Waits for the spindle speed to stabilize before continuing.
| Property | Value |
|---|---|
| Required | No |
| Type | boolean |
| Default | true |
# Custom Tool
Custom tool with no predefined behaviour or required properties.
# Tool number
Numeric identifier used to select this tool in G-code.
| Property | Value |
|---|---|
| Required | Yes |
| Type | integer |
| Default | null |
| Limits / format | minimum: 0 |
# Name
User-defined name for this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | `` |
# X real axis (for IDEX architecture)
Logical axis used as this tool's X coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | X |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Y real axis (for IDEX architecture)
Logical axis used as this tool's Y coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Y |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# Z real axis (for IDEX architecture)
Logical axis used as this tool's Z coordinate reference.
| Property | Value |
|---|---|
| Required | No |
| Type | string |
| Default | Z |
| Allowed values | X, Y, Z, U, V, W, A, B, C |
# X offset
Tool offset from the machine origin along the X axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Y offset
Tool offset from the machine origin along the Y axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Z offset
Tool offset from the machine origin along the Z axis.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
# Motor
References the motor that drives this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Temperature setpoints
Preset temperatures values for the control slider.
| Property | Value |
|---|---|
| Required | No |
| Type | array |
| Default | [] |
| Limits / format | items: number; item minimum: 0 |
# Fan
References the fan used to cool this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Fan act. temp
Tool temperature above which the assigned fan is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Part cooling fan
References the fan used to cool printed material.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cooling
References the liquid-cooling accessory assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Water cool act. temp.
Tool temperature above which liquid cooling is activated.
| Property | Value |
|---|---|
| Required | No |
| Type | number or null |
| Default | null |
# Low extrusion speed
Slow speed used for manual extrusion operations in the control interface.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 5 |
| Limits / format | minimum: 1; maximum: 1000 |
# High extrusion speed
Fast speed used for manual extrusion operations.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 60 |
| Limits / format | minimum: 1; maximum: 1000 |
# Pressure compensation K coefficient
Pressure advance coefficient used to compensate for extrusion pressure changes.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 0 |
| Limits / format | minimum: 0; maximum: 1 |
# Number of Heaters
Number of heaters configured for this custom tool.
| Property | Value |
|---|---|
| Required | No |
| Type | integer |
| Default | 1 |
| Allowed values | 1, 2, 3 |
# Filament size
Diameter of the filament used by the tool, in millimetres.
| Property | Value |
|---|---|
| Required | No |
| Type | number |
| Default | 2.85 |
| Allowed values | 1.75, 2.85 |
# Filament monitor
References the filament monitor assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Single Heater
# Heater
References the heater assigned to this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Dual Heater
# Top heater
References the heater assigned to the top heating zone of this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Bottom heater
References the heater assigned to the bottom heating zone of this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Triple Heater
# Top heater
References the heater assigned to the top heating zone of this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Middle heater
References the heater assigned to the middle heating zone of this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |
# Bottom heater
References the heater assigned to the bottom heating zone of this tool.
| Property | Value |
|---|---|
| Required | No |
| Type | string or null |
| Default | null |